Mechanical features:
• The optimal bed structure is designed to withstand the inertia generated by high G. It is rock solid and stable.
• The castings are treated with secondary tempering and long time natural aging treatment to ensure the stability of the castings and not easy to deform.
• Strictly in accordance with the Japanese assembly process standards, in pursuit of higher mechanical precision.
• Strictly in accordance with the Japanese assembly process standards, in pursuit of higher mechanical precision.
• Three-axis precision ball screws with small pitches are used to ensure high dynamic responsiveness.
•Standard with fully enclosed tool magazine, high stability tool changer system, fast tool change speed and higher stability.
• Adopting reasonable chip removal mechanism, it is convenient to clean up the waste chips and not easy to leak oil.
• Customised spindles for different machining requirements.
机器规格 | 单位 | W8 |
型程 | ||
X轴行程 | mm | 820 |
Y轴行程 | mm | 570 |
Z轴行程 | mm | 570 |
主轴端至工作台面 | mm | 110-680 |
主轴中心至立柱滑道面距离 | mm | 600 |
导轨尺寸 | ||
X轴滑轨跨距/宽度 | mm | 345/45 |
Y轴滑轨跨距/宽度 | mm | 520/45 |
Z轴滑轨跨距/宽度 | mm | 350/45 |
螺杆尺寸 | ||
X/Y/Z 螺杆尺寸 | mm | Φ40 |
螺距 | mm | 12 |
工作台 | ||
工作台尺寸 | mm | 1020*550 |
T型槽宽(宽*槽数*间距) | mm | 18*5*90 |
工作台最大载重量 | kgs | 650 |
主轴 | ||
主轴最高转速 | rpm | 12000 |
主轴型式 | type | 直结式 |
主轴马力 | kw | 7.5/11 |
X/Y/Z 轴伺服马达 | kw | 3.0/3.0/3.0 |
主轴端孔斜度 | type | BBT40 |
主轴前端轴承 | mm | 70 |
进给速度 | ||
快速位移(X/Y/Z轴) | m/min | 36/36/36 |
切削位移速度 | m/min | 1-10 |
刀库 | ||
换刀型式 | 刀臂式 | |
刀具数量 | pcs | 24 |
刀具重量 | kgs | 7.5 |
最大刀长 | mm | 300 |
最大刀直径 | mm | 80/140 |
刀对刀时间 | sec | 2 |
机械规格 | ||
气压源 | kgs/cm2 | 6 |
占地面积(长*宽*高) | mm | 2590/3460/3140 |
机械净重 | kgs | 5800 |
主轴油冷机 | 手持式电子手轮 | 主轴鼻端迷宫防尘吹气 | 油水分离 |
刀臂式刀库 | 电气箱内热交换器 | 地基螺丝与垫块 | 变压器 |
水盘冲屑装置 | 主轴吹气系统 | 工作灯 | 手提吹屑空气枪 |
自动给油润系统 | 全罩式密封钣金 | 三色警示灯 | 机器清洗水枪 |
刚性攻牙 | 水箱及集屑箱 | 工具箱 | 操作使用说明书 |
对刀仪 | 刀具破损检测器 | BT40/8000rpm皮带式主轴 | 圆盘式油水分离机 |
三轴光学尺 | 自动排屑机 | BBT40/15000rpm 直结式主轴 | 自动断电系统(M30) |
主轴中心出水系统 | 旋转工作台(第四轴) | 6000转全齿主轴 | 热补偿系统 |
稳压器 | 油雾回收系统 | 24000/30000内藏主轴 |